The red circle was placed directly over the location of the web. Following the placement of the circle over the web location on the image of the relative location, I began working on detailing the scale. The line tool was utilized to draw a straight red line across the middle of the quarter from the web image. The line was 0.900 in width and placed directly above the quarter with a small gap between itself and the quarter. Above the line, I used the text tool to write out the width of the quarter in millimeters (24.25 mm). The font was chosen to be red like the line it sat above, and the font size was 18. These steps led to the completion of the first two components of the figure.
Finally, I started to add the details to the map location. The words “Student Union” were written in red with the text tool and superimposed onto the corresponding building at the center of the map. I designated the font size to be 30. I then created a small red dot (W=2.268 x H =2.268) on the map at the location where the web was found. The dot was filled with the same color red. A black line was then created that extended from the newly placed dot at an approximately 45 degree angle. The line was black and had a width of 0.265. It stretched beyond the student map depiction of the student union and continued a little farther. At its terminal end, opposite the dot, it connected to another box created using the rectangle tool (W=39.997 x H=13.539). The box had a black outline with a width of 0.819 and a white fill. Inside the box the word “Location” was written in black with size 24 font. With this step done, the figure was complete and it was exported at a PNG image file.
Recent comments